subject
Engineering, 13.09.2019 00:30 pettygirl13

Find the error in the following proof that 2 = 1. consider the equation a = b. multiply both sides by a to obtain a 2 = ab. subtract b 2 from both sides to get a 2 − b 2 = ab − b 2 . now factor each side, (a + b)(a − b) = b(a − b), and divide each side by (a − b) to get a + b = b. finally, let a and b equal 1, which shows that 2 = 1.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.
Answers: 2
question
Engineering, 04.07.2019 18:10
Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables
Answers: 1
question
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
question
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
You know the right answer?
Find the error in the following proof that 2 = 1. consider the equation a = b. multiply both sides b...
Questions
question
Mathematics, 14.06.2021 20:50
question
Mathematics, 14.06.2021 20:50
question
Mathematics, 14.06.2021 20:50
question
Computers and Technology, 14.06.2021 20:50