Engineering, 02.09.2019 23:10 michael11948

An air compressor, 200 mm bore and 300 mm stroke, has a connecting rod 625 mm long. the reciprocating parts have a mass of 135 kg and the speed is 250 rev/min. when the crank is at 30° to the i. d.c and moving inwards, the pressure of the air is 840 kn/m2. the crank pin is 60 mm diameter. neglecting the effect of the mass of the connecting rod, determine: the rubbing velocity at the surface of the crank pin [0.95 m/s]the force on the crankshaft bearing [11.44 kn].the torque reaction on the frame [1.029 knm]. draw a clear sketch and explain the relevant steps.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 12:10

On a average work day more than work place firs are reorted

Answers: 1

Answer

Engineering, 04.07.2019 18:10

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Ifa component is made of two or more materials with different modulus of elasticity (e), it is called a composite member and we calculate the factor·n". mention the formula for calculating n". also, ifn> 1, explain what will happen to the 1. transformed.gi) ifn 1, what will happen to the material when transformed material when

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]

Answers: 1

Answer

You know the right answer?

An air compressor, 200 mm bore and 300 mm stroke, has a connecting rod 625 mm long. the reciprocatin...

Questions