Acomposite wall is to be used to insulate a freezer chamber at -350c. two insulating materials are to be used with conductivities of 0.04 w/mk and 0.1 w/mk. if the outside surface temperature of the inner layer (0.04 w/mk) should not go below zero and if the exposed surface temperature should not go below (the expected wet bulb temperature) 220c determine the insulation thicknesses. the heat gain is to be limited to 10 w/m^2. also estimate the value of convection coefficient at such a situation. outside is at 250c.

thickness1=1.4m

thickness2=2.2m

convection coefficient=0.33W/m^2K

Explanation:

you must use this equation to calculate the thickness:

L=K(T2-T1)/Q

L=thickness

T=temperature

Q=heat

L1=0.04*(0--350)/10=1.4m

L2=0.1(220-0)/10=2.2m

Then use this equation to calculate the convective coefficient

H=Q/(T2-T1)

H=10/(250-220)=0.33W/m^2K

unlike the threaded fasteners which are used to clamp the machine members, power screws are used to transmit power. common applications of power screws are: screw jacks: to lift weight. lead screw of lathe: for axial movement of tool and its precise positioning.

answer:

explanation:

assault rifle is a rapid-fire, magazine-fed rifle designed for military use. it is a shoulder-fired weapon that allows the shooter to select between semi-automatic (requiring you pull the trigger for each shot), fully automatic (hold the trigger and the gun continuously fires) or three-shot-burst modes.