subject
Engineering, 24.08.2019 00:10 lizzyhearts

Apipe is to be buried in the ground. the temperature of the ground is 10°c at the start of the day. during daytime, there is heat flux on the surface due to solar radiation. if the temperature of the pipe is to be kept very close to the initial temperature 10°c, calculate how deep the pipe needs to be buried. use resources online and research articles to obtain the thermophysical properties of the ground required to do the calculation. the ground can be considered part of earth's crust. plot temperature as a function of depth inside the ground at the end of day. make assumptions as necessary.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
question
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
question
Engineering, 04.07.2019 18:10
The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false
Answers: 1
question
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
You know the right answer?
Apipe is to be buried in the ground. the temperature of the ground is 10°c at the start of the day....
Questions
question
Mathematics, 10.07.2019 13:50