Engineering, 23.08.2019 01:30 emmmmmily997

Steam enters the high-pressure turbine of a steam power plant that operates on the ideal reheat rankine cycle at 1000 psia and 900°f and leaves as saturated vapor. steam is then reheated to 800°f before it expands to a pressure of 1 psia. heat is transferred to the steam in the boiler at a rate of 6 × 10^4 btu/s. steam is cooled in the condenser by the cooling water from a nearby river, which enters the condenser at 45°f. use steam tables. determine the following: (a) the pressure at which reheating takes place. psia (b) the net power output and thermal efficiency. % (c) the minimum mass flow rate of the cooling water required. lbm/s

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite

Answers: 3

Answer

Engineering, 04.07.2019 18:10

An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0

Answers: 3

Answer

Engineering, 04.07.2019 18:20

A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.

Answers: 3

Answer

Engineering, 04.07.2019 19:10

Acircular aluminum shaft mounted in a journal is shown. the symmetric clearance gap between the shaft and journal is filled with sae 10w-30 oil at t 30°c. the shaft is caused to turn by the attached mass and cord. develop and solve a differential equation for the angular speed of the shaft as a function of time.

Answers: 2

Answer

You know the right answer?

Steam enters the high-pressure turbine of a steam power plant that operates on the ideal reheat rank...

Questions