Aload of 90 n falls from a height of 150 mm onto a collar attached to the lower end of a rigidly held rod. the rod is vertical and 900 mm long. it has a diameter of 12 mm for a length of 600 mm and the remaining 300 mm is 9 mm in diameter. calculate the maximum stress induced in the rod. (take e as 210 gpa.)

Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented