Engineering, 21.08.2019 17:10 kaylaelaine18
How could you go about determining the amount of time needed for a material to lose 1 micron?
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
Engineering, 04.07.2019 18:10
Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.
Answers: 2
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis
Answers: 1
You know the right answer?
How could you go about determining the amount of time needed for a material to lose 1 micron?...
Questions
Mathematics, 03.08.2019 07:40
Chemistry, 03.08.2019 07:40
History, 03.08.2019 07:40
History, 03.08.2019 07:40
Chemistry, 03.08.2019 07:40
Mathematics, 03.08.2019 07:40
Mathematics, 03.08.2019 07:40
Mathematics, 03.08.2019 07:40
Mathematics, 03.08.2019 07:40
