subject
Engineering, 21.08.2019 05:10 irishvball7

Aheat engine drives a heat pump at c. o.p equal to 5, by suppling 70 percent of the work output. the heat rejected by the heat engine and the heat pump are used to heat water in a certain chemical plant. the total heat received by the chemical plant is twice the amount of the heat supplied to the heat engine. (a) give a schematic diagram of the complete system. (b) calculate the efficiency of the heat engine.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 19:30
When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line
Answers: 3
question
Engineering, 04.07.2019 18:10
Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)
Answers: 1
question
Engineering, 04.07.2019 18:10
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
question
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
You know the right answer?
Aheat engine drives a heat pump at c. o.p equal to 5, by suppling 70 percent of the work output. the...
Questions
question
Mathematics, 13.04.2020 19:16
question
History, 13.04.2020 19:16