subject
Engineering, 21.08.2019 03:10 emblemhacks

Anozzle with an outlet diameter of 10 cm is bolted to a 20 cm diameter horizontal pipe. water at a pressure of 345 kpa enters the nozzle, and the issuing jet has a velocity of 22 m/s. determined the force provided by the flange bolts to keep the nozzle attached to the pipe.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
question
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
question
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
question
Engineering, 04.07.2019 18:20
The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?
Answers: 3
You know the right answer?
Anozzle with an outlet diameter of 10 cm is bolted to a 20 cm diameter horizontal pipe. water at a p...
Questions
question
Mathematics, 14.10.2019 16:30
question
Mathematics, 14.10.2019 16:30
question
Mathematics, 14.10.2019 16:30
question
Mathematics, 14.10.2019 16:30