subject
Engineering, 20.08.2019 23:30 jetskiinbunny31

Acryogenic liquid line in an ultra-low temperature tissue storage facility has a diameter of 0.05 cm, a surface temperature of -163 °c, and a surface emissivity of 0.2. this line is placed at 0.15m away from a pipe with a diameter of 0.1 m, carrying heated liquid at 47°c and having a surface emissivity of 0.5. the pipe and the line are parallel to one another and are exposed to the sky, which on a clear night can be assumed to have the same temperature as extra-terrestrial space, of 4 k. neglect convection effects in your analysis. a.) draw the corresponding radiation resistance network and label what each node. b) calculate the net radiation heat transfer rate per unit length to the line carrying the cryogenic c) propose a solution to reduce to half the net radiation heat transfer rate per unit length of line(must be justified mathematically). d) calculate the net radiation heat transfer rate per unit length to the line carrying the cryogenic fluid if the line and the pipe are moved inside a large enclosure with adiabatically insulated walls of 0.6 emissivity. for simplicity, when answering this question, assume that the walls of the enclosure have a temperature of 4k.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 19:10
The short distance from the objective lens to the object causes problems at high magnification. which of the following is the most serious? a. cleaning the object surface b. positioning the object c. reflection from the object surface. d. illumination of the object
Answers: 1
question
Engineering, 04.07.2019 19:10
Analyze the factors that influence the choice between the following pairs of processes to make the products indicated: i) sand casting versus die casting of an electric-motor housing ii) thread rolling versus machining of a bolt for high-strength application. (co3/c5)
Answers: 3
question
Engineering, 06.07.2019 03:20
Avertical steel rod of length 2.0 m and diameter 25 mm is rigidly fixed at its upper end and has a flange at its lower, free, end. what will be the maximum stress produced in the rod when a load of 20 kn is applied, (a) gradually to the lower end, (b) suddenly to the lower end, (c) by a collar falling from a height of 50 mm on to the flange?
Answers: 3
question
Engineering, 06.07.2019 03:30
An ammonia compressor has a 5% clearance volume and displacement rate of 80 l/s and pumps against a condensing temperature of 40°c. for two different temperatures of -10°c and 10°c, compute the mass flow rate of refrigerant assuming the clearance volumetric efficiency applies. discharge specific volume corresponding to-10°c and 10°c are 112.5 l/kg and 95 l/kg, respectively.
Answers: 2
You know the right answer?
Acryogenic liquid line in an ultra-low temperature tissue storage facility has a diameter of 0.05 cm...
Questions
question
Mathematics, 02.10.2020 14:01
question
Mathematics, 02.10.2020 14:01
question
Mathematics, 02.10.2020 14:01