subject
Engineering, 20.08.2019 23:20 mariehayes099

Arefrigeration plant operates in pretoria on refrigerant r134a at an evaporator pressure of 105 kpa (gauge) and a condensing pressure of 920 kpa (gauge). there is a sub-cooling of 3 k with a superheat of the gas entering the compressor of 8 k. the compressor is a four-cylinder reciprocating compressor with a bore of 67 mm and a stroke of 57 mm with an estimated capacity of 35 kw. the compressor is directly coupled to an electric motor running at 1470 rev/min and a power consumption of 19,5 kw. calculate: (a) the clearance volume efficiency if the compressor clearance is 3,6 %; (b) the actual volumetric efficiency; (c) the compression efficiency when the mechanical efficiency is 85% and the motor efficiency 90%.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
question
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
question
Engineering, 04.07.2019 18:10
Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)
Answers: 1
question
Engineering, 04.07.2019 18:10
Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation
Answers: 1
You know the right answer?
Arefrigeration plant operates in pretoria on refrigerant r134a at an evaporator pressure of 105 kpa...
Questions
question
Arts, 18.06.2021 16:30
question
Social Studies, 18.06.2021 16:30
question
Mathematics, 18.06.2021 16:30
question
Mathematics, 18.06.2021 16:30
question
Mathematics, 18.06.2021 16:30
question
Mathematics, 18.06.2021 16:40
question
Mathematics, 18.06.2021 16:40