Engineering, 20.08.2019 20:10 xlxJazmin
In a gear-driven exhaust fan and to improve the air flow, the speed of the fan needs to be increased to 460 rpm, but it must be as close to this speed as possible. the existing 3- hp motor will be used, which operates at 1750 rpm. the housing should not be altered, which has a bearing system with a center distance of 9.5 in. determine required diameters for the gears. (a) find the velocity ratio determine the pinion and gear diameters if motor gear has 22 teeth, find the diametral pitch pd and fan gear number of teeth (d) determine the output torque
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2
Answers: 3
Engineering, 04.07.2019 18:10
Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?
Answers: 2
Engineering, 04.07.2019 18:10
Manometers are good examples of measuring instruments, nowadays they are not as common as before. a)-capacitive probe gauges b)-gravitational gauges deformation ) gauges d)-digital gauges
Answers: 1
Engineering, 04.07.2019 18:20
Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?
Answers: 2
You know the right answer?
In a gear-driven exhaust fan and to improve the air flow, the speed of the fan needs to be increased...
Questions
Physics, 01.12.2021 03:00
English, 01.12.2021 03:00
Physics, 01.12.2021 03:00
Mathematics, 01.12.2021 03:00
Mathematics, 01.12.2021 03:00
Computers and Technology, 01.12.2021 03:10
Computers and Technology, 01.12.2021 03:10
Mathematics, 01.12.2021 03:10
Chemistry, 01.12.2021 03:10
History, 01.12.2021 03:10
