Engineering, 20.08.2019 19:20 mattybacchetti
Afour-cylinder, four-stroke internal combustion engine has a bore of 3.7 in and a stroke of 3.4 in. the clearance volume is 16% of the cylinder volume at bottom dead center and the crankshaft rotates at 2400 rpm. the processes within each cylinder are modeled as an air-standard otto cycle with a pressure of 14.5 lbf/in.2 and a temperature of 60f at the beginning of compression. the maximum temperature in the cycle is 5200r. based on this model, calculate the net work per cycle, in btu, and the power developed by the engine, in horsepower.
Answers: 3
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
Engineering, 04.07.2019 18:10
Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.
Answers: 2
Engineering, 06.07.2019 02:30
A12 mm diameter shaft runs in a plain cylindrical bush 30 mm long that is located in an 18 mm diameter hole in a housing. the shaft-inner bush fit is h8 f and the outer bush-housing fit is h7-p6. make a fully cimensioned sketch of the bush with tolerances. find the maximum and minimum clearance or interference for both fits on the inner and outer diameters of the bush
Answers: 3
Afour-cylinder, four-stroke internal combustion engine has a bore of 3.7 in and a stroke of 3.4 in....
History, 01.04.2020 01:09
Health, 01.04.2020 01:09
Social Studies, 01.04.2020 01:09
Mathematics, 01.04.2020 01:09
Mathematics, 01.04.2020 01:09
Mathematics, 01.04.2020 01:09
Mathematics, 01.04.2020 01:10
Mathematics, 01.04.2020 01:10