subject
Engineering, 20.08.2019 17:20 keaisad12

A150 mm outer diameter by 110 mm inner diameter steel hub with 280 mm assembled on a 110 mm diameter steel shaft with a heavy press-fit.. the modulus of elasticity is to be 200gpa with a maximum clearance of 0.085mm. determine the following i) the pressure at the contact surface ii the tangential stress ii) the axial force for the system iv) the torque transmitted by the system

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
question
Engineering, 04.07.2019 18:20
Determine the damped natural frequencies and the steady state response of a decoupled damped forced two degrees of freedom system. 10ä1 + 2q1 20q1 10 cos t; 10q2 +4q2 + 40q2 10 cos t
Answers: 3
question
Engineering, 04.07.2019 18:20
Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k
Answers: 3
question
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
You know the right answer?
A150 mm outer diameter by 110 mm inner diameter steel hub with 280 mm assembled on a 110 mm diameter...
Questions
question
Mathematics, 10.07.2019 10:20