A100-mm-diameter cast iron shaft is acted upon by a 10 kn. m bending moment, a 8 kn. m torque, and a 150 kn axial force simultaneously. the ultimate tensile strength of the shaft material is 210 mpa, and the ultimate compressive strength of the shaft material is 750 mpa, determine the safety factor against failure for the above types of loading using a proper theory of failure.

An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented