Engineering, 07.08.2019 19:20 0436500

Aspherical hailstone that has a radius r, is formed in a high-altitude cloud at -20°c. consider ro a parameter that takes values from 2.5mm to 12.5 mm with increments of 2.5 mm. if the stone begins to fall through warmer air at 5°c, determine for each value of ro: a) how long will it take before the outer surface begins to melt b) what is the temperature of the stone's center at this point in time c) how much energy (j) has been transferred to the stone in this time interval a convection heat transfer coefficient of 250 w/m²k may be assumed, and the properties of the hailstone may be taken to be those of ice. clearly state all the assumptions made, indicate the heat transfer case and the solution equations that apply. verify the validity of the solution for each value of ro. plot the three results against the values of ro.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Manometers are good examples of measuring instruments, nowadays they are not as common as before. a)-capacitive probe gauges b)-gravitational gauges deformation ) gauges d)-digital gauges

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Have a greater impact on maintenance productivity than any other support group. (clo5) a)-the top management b)-inventory and purchasing c)-sub-contracting d)-cmms

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point.the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.

Answers: 1

Answer

Engineering, 04.07.2019 19:20

Liquid flows at steady state at a rate of 2 lb/'s through a pump, which operates to raise the elevation of the liquid 100 ft from control volume inlet to exit. the liquid specific enthalpy at the inlet is 40.09 btu/lb and at the exit is 40.94 btub. the pump requires 3 btu/s of power to operate. if kinetic energy effects are negligible and gravitational acceleration is 32.174 tt/s, the heat transfer rate associated with this steady state process is most closely 1)-2,02 btu/s from the liquid to the surroundings 2)-3.98 btu/s from the surroundings to the liquid. 3)-4.96 btu/s from the surroundings to the liquid. 4)-1.04 btu/s from the liquid to the surroundings.

Answers: 2

Answer

You know the right answer?

Aspherical hailstone that has a radius r, is formed in a high-altitude cloud at -20°c. consider ro a...

Questions