Engineering, 07.08.2019 18:30 21marmong
Ashort horizontal circular bars (5 cm long and 2 cm in diameter) taken from the furnace at 650 k and cooled in air at 300 k: (a)-draw the schematic of the system. (b)-estimate the heat transfer coefficient between.
Answers: 2
Engineering, 03.07.2019 14:10
Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned
Answers: 2
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
Ashort horizontal circular bars (5 cm long and 2 cm in diameter) taken from the furnace at 650 k and...
Chemistry, 14.09.2019 10:30
Computers and Technology, 14.09.2019 10:30
Computers and Technology, 14.09.2019 10:30
Computers and Technology, 14.09.2019 10:30
Computers and Technology, 14.09.2019 10:30
Computers and Technology, 14.09.2019 10:30
Computers and Technology, 14.09.2019 10:30
Computers and Technology, 14.09.2019 10:30
Computers and Technology, 14.09.2019 10:30
Computers and Technology, 14.09.2019 10:30