Engineering, 07.08.2019 18:10 lorenzo1beaton
Asurface grinding operation is accomplished with a 20-cm diameter grinding wheel that has tangential velocity of 20 m/s on a workpiece that is moving going through grinding at 0.1 m/s removal of 0.25 mm of material results in an increase in temperature of 50°c in the workpiece. determine the increase in temperature rise in the workpiece if 0.4 mm of material is removed.
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
Engineering, 04.07.2019 18:20
Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k
Answers: 3
Engineering, 04.07.2019 19:10
Ahelical coil spring has a mean diameter of 50 mm, a wire diameter of 5.5 mm and is wound with a pitch of 10 mm. the spring steel has an ultimate strength of 1250 mpa. find the force needed to compress the spring solid and the wire stress in this condition. state whether the spring will return to its initial length.
Answers: 1
You know the right answer?
Asurface grinding operation is accomplished with a 20-cm diameter grinding wheel that has tangential...
Questions
English, 23.03.2021 05:40
Chemistry, 23.03.2021 05:40
Mathematics, 23.03.2021 05:40
English, 23.03.2021 05:40
Mathematics, 23.03.2021 05:40
Mathematics, 23.03.2021 05:40
Advanced Placement (AP), 23.03.2021 05:40
History, 23.03.2021 05:40
Physics, 23.03.2021 05:40
Social Studies, 23.03.2021 05:40
