Engineering, 07.08.2019 04:30 morganhines181
Ametal plate (k=180 w/m-k, p-=2800 kg/m, and cp=880 j/kg k) with a thickness of 1 cm is being cooled by air at 5°c with a convection heat transfer coefficient of 30 w/m^2 k. if the initial temperature of the plate is 300°c, determine the plate temperature gradient at the surface after 3 minutes of cooling. hint: use the lumped system analysis to calculate the plate surface temperature. make sure to verify the application of this method to this problem
Answers: 1
Engineering, 04.07.2019 18:10
What difference(s) did you notice using a pneumatic circuit over hydraulic circuit.explain why the pneumatic piston stumbles when it hits an obstacle.
Answers: 2
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Engineering, 04.07.2019 18:10
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
Ametal plate (k=180 w/m-k, p-=2800 kg/m, and cp=880 j/kg k) with a thickness of 1 cm is being cooled...
Mathematics, 12.06.2020 20:57
Mathematics, 12.06.2020 20:57
Mathematics, 12.06.2020 20:57
History, 12.06.2020 20:57
History, 12.06.2020 20:57