The standard gasoline engine for the 2000 honda civic sedan 1.4l includes the following data: configuration: in-line four-stroke, four-cylinder engine bore: 2.95 inches stroke: 3.11 inches compression ratio: 9.1: 1 part i-model parameters: determine: a) the total engine volume vbdc for all cylinders (cubic inches), b) the mass of air (i. e.

Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.

Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives

The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?