Engineering, 26.07.2019 19:20 helphelp81
Cutting and forming operations performed on relatively thin sheets of metal. a)- true b)-false
Answers: 2
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above
Answers: 1
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
Cutting and forming operations performed on relatively thin sheets of metal. a)- true b)-false...
Mathematics, 15.10.2019 08:00
Mathematics, 15.10.2019 08:00
Mathematics, 15.10.2019 08:00
Social Studies, 15.10.2019 08:00
English, 15.10.2019 08:00
Social Studies, 15.10.2019 08:00
Social Studies, 15.10.2019 08:00
History, 15.10.2019 08:00
History, 15.10.2019 08:00
Biology, 15.10.2019 08:00
Mathematics, 15.10.2019 08:00
Mathematics, 15.10.2019 08:00