subject
Engineering, 26.07.2019 19:10 dondre54

Avehicle of 1 200 kg is moving at a speed of 40 km/h on an incline of 1 in 50. the total constant rolling and wind resistance is 600 n. the efficiency of the drive from the engine trough the gearbox to the wheels is 80 % and the gear ratio causes a final engine to wheel velocity ratio of 4: 1. the effective wheel diameter is 500 mm. calculate the engine power to maintain this speed.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.
Answers: 2
question
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
question
Engineering, 04.07.2019 18:10
Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.
Answers: 2
question
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
You know the right answer?
Avehicle of 1 200 kg is moving at a speed of 40 km/h on an incline of 1 in 50. the total constant ro...
Questions
question
Computers and Technology, 10.07.2019 01:00
question
Computers and Technology, 10.07.2019 01:00
question
Health, 10.07.2019 01:00
question
Health, 10.07.2019 01:00