subject
Engineering, 26.07.2019 16:20 amandaelisantos

Hot air flows through a pipe, as shown above. the properties of air may be taken as: k=0.03 w/m-k, pr=0.7, μ=208.2 x 10"n s/m^2 and ρ=0995 kg/m^3. calculate heat transfer coefficient between the inner surface of the pipe and the hot air.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 14:10
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
question
Engineering, 03.07.2019 15:10
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
question
Engineering, 04.07.2019 18:10
What difference(s) did you notice using a pneumatic circuit over hydraulic circuit.explain why the pneumatic piston stumbles when it hits an obstacle.
Answers: 2
question
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
You know the right answer?
Hot air flows through a pipe, as shown above. the properties of air may be taken as: k=0.03 w/m-k, p...
Questions
question
Mathematics, 12.05.2021 18:50
question
Mathematics, 12.05.2021 18:50
question
Mathematics, 12.05.2021 18:50
question
Mathematics, 12.05.2021 18:50