Engineering, 20.07.2019 00:40 jeanette7482
In shaft design, this of the following has the least influence on the shaft diameter to be determined: (a) shaft deflection (b) bearing type (c) factor of safety (d) rotational speed of the shaft
Answers: 2
Engineering, 04.07.2019 18:20
Ahe-xe mixture containing a 0.75 mole fraction of helium is used for cooling electronics in an avionics application. at a temperature of 300 k and atmospheric pressure, calculate the mass fraction of helium and the mass density, molar concentration and molecular weight of the mixture. if the cooling capacity is 10 l, what is the mass of the coolant?
Answers: 3
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
Engineering, 04.07.2019 19:10
When subject to a steady load (within elastic range) over a long period of time, what is the major difference in material behavoir between steel and plastic?
Answers: 2
Engineering, 04.07.2019 19:10
The proportional limit is always greater than the yield strength for a material. a)-trune b)- false
Answers: 3
In shaft design, this of the following has the least influence on the shaft diameter to be determine...
History, 09.07.2019 10:40
Mathematics, 09.07.2019 10:40
Advanced Placement (AP), 09.07.2019 10:40
History, 09.07.2019 10:40
History, 09.07.2019 10:40
Health, 09.07.2019 10:40
English, 09.07.2019 10:40
Mathematics, 09.07.2019 10:40