subject
Engineering, 19.07.2019 21:30 monei1998

An ideal diesel engine uses air as the working fluid. the volume of the cylinder is 1200 cmº at the beginning of the compression process, 75 cm at the end, and 150 cm after the heat-addition process. the state of air at the beginning of the compression process is 100 kpa and 17 °c. determine (a) the pressure at the beginning of the heat-rejection process, (b) the network per cycle, and (c) the mean effective pressure.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
question
Engineering, 04.07.2019 18:10
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
question
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
question
Engineering, 04.07.2019 18:20
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
You know the right answer?
An ideal diesel engine uses air as the working fluid. the volume of the cylinder is 1200 cmº at the...
Questions
question
Mathematics, 23.02.2020 02:59
question
Mathematics, 23.02.2020 03:01