You turn on your kitchen sink faucet and hot water falls onto the bottom of the cold sink. consider he conduction of heat within the material that the sink is made of in the area under the thin film of water before it equation for this situation. justify the elimination of all unnecessary terms by stating your assumptions. rewrite the heat conduction equation after the appropriate terms have been eliminated. propose boundary and/or initial conditions that might be appropriate for this situation. reaches the hydraulic jump. write down the complete differential heat conduction

A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?