The inlet and outlet speeds for a reduction gear train are 2000 and 320rpm. the pressure angle is designed to be 25 degrees. the gears have a 5-mm module and their center distance is 435mm. determine the number of teeth for both gears, the pitch diameters, and the radii of the base, addendum, and dedendum circles.

If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.

The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.