subject
Engineering, 17.07.2019 22:20 chaeyoung22

Aroom is kept at -5c by a vapour comprression refrigeration cycle with r-134a as the refrigerant. heat is rejected to cooling water that enters the condenser at 20°c at a rate of 0.13 kg/s and leaves at 28°c. the refrigerant enters the condenser at 1.2 mpa and 50°c and leave as a saturated liquid. if the compressor consumes 1.9 kw of power, determine: a) the refrigeration load and cop, the second law efficiency of the refrigerator and the total exergy destruction in the cycle, and b) c) the exergy destruction in the condenser

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
question
Engineering, 04.07.2019 18:20
Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false
Answers: 3
question
Engineering, 04.07.2019 19:10
Apressure vessel with an r/t 20 cannot be treated as thin walled vessel. a)-trune b)- false
Answers: 3
You know the right answer?
Aroom is kept at -5c by a vapour comprression refrigeration cycle with r-134a as the refrigerant. he...
Questions
question
Mathematics, 05.04.2020 04:39
question
Mathematics, 05.04.2020 04:39