subject
Engineering, 11.07.2019 04:30 reticentrobbie

Abronze statue weighing 4 tonnes with a base of area 0.8 m2 is placed on a granite museum floor. the yield strength of the bronze is 240 mpa. what is the true area of contact, between the base and the floor?

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:20
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
question
Engineering, 04.07.2019 19:10
The air in an automobile tire with a volume of 0.015 m3 is at 32°c and 140 kpa gage. determine the amount of air that must be added to raise the pressure to the recommended value of 206 kpa gage. assume the atmospheric pressure to be 128 kpa and the temperature and the volume to remain constant.[r-0.287 kj/kgk]
Answers: 3
question
Engineering, 04.07.2019 19:20
Afan that can provide air speeds up to 60 m/s is to be used in a low-speed wind tunnel with atmospheric air at 35 c. if one wishes to use the wind tunnel to study flat-plate boundary layer behavior up to reynolds numbes of re 10, what is the minimum plate length that should be used? at what distance from the leading edge would transition occur if the critical reynolds nurnber were rer,e = 5 × 105?
Answers: 2
question
Engineering, 06.07.2019 03:30
Give three differences between corrosion of metals and the corrosion of ceramics? what is static fatigue?
Answers: 1
You know the right answer?
Abronze statue weighing 4 tonnes with a base of area 0.8 m2 is placed on a granite museum floor. the...
Questions
question
Mathematics, 10.06.2021 23:30
question
Mathematics, 10.06.2021 23:30