subject
Engineering, 11.07.2019 04:30 lele2010

Aclosed gas turbine unit uses helium as the working fluid. there are two stages of compression with intercooling from 480kpa and 290k to a maximum pressure of 2.75mpa with an intermediate pressure of 1149kpa. the regenerator has an effectiveness of 60% and delivers the helium to the high-temperature heat exchanger, where it is heated to 890k. there are two turbine stages, the first discharging at 1170kpa. following the first turbine stage, a heat exchanger re-heats the helium to 890k. the second turbine exhausts at 480kpa to the regenerator. all the expansion and compression processes are isentropic. a)- the compressor work per kilogram b)- the turbine work per kilogranm c)- the heat added to the cycle per kilogram d)- the thermal efficiency e)- the power output for a helium flow rate of 45kg/s

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
question
Engineering, 04.07.2019 18:10
The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false
Answers: 2
question
Engineering, 04.07.2019 18:10
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
question
Engineering, 04.07.2019 18:10
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
You know the right answer?
Aclosed gas turbine unit uses helium as the working fluid. there are two stages of compression with...
Questions
question
Mathematics, 29.02.2020 04:24