subject
Engineering, 11.07.2019 04:10 ccarwile01

One of the following is correct absolute pressure= atmospheric pressure - gauge pressure b)- gauge pressure=absolute pressure + atmospheric pressure c)- absolute temperature may exist as a negative value d)- the mass in a control mass system constant.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false
Answers: 2
question
Engineering, 04.07.2019 18:10
Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.
Answers: 1
question
Engineering, 04.07.2019 18:10
The higher the astm grain size number, the finer the gran is. a)-true b)-false
Answers: 2
question
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
You know the right answer?
One of the following is correct absolute pressure= atmospheric pressure - gauge pressure b)- gauge p...
Questions
question
Mathematics, 21.10.2020 01:01
question
Mathematics, 21.10.2020 01:01
question
English, 21.10.2020 01:01
question
Mathematics, 21.10.2020 01:01
question
Mathematics, 21.10.2020 01:01