Engineering, 11.07.2019 03:30 awesome266
Before compression, the air in an ideal otto cycle engine is 98 kpa and 17°c. the compression ratio is 8.4, the displacement volume is 2.7l and the temperature after the heat addition process is 2100 k. using variable specific heat analysis, determine: . a)- maximum pressure in the cycle (in kpa) b)- heat input per cycle, in k] c)- net work per cycle, in kj
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Engineering, 04.07.2019 18:10
The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length
Answers: 2
Engineering, 04.07.2019 18:20
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
Engineering, 04.07.2019 18:20
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
You know the right answer?
Before compression, the air in an ideal otto cycle engine is 98 kpa and 17°c. the compression ratio...
Questions
Mathematics, 06.05.2020 17:08
English, 06.05.2020 17:08
History, 06.05.2020 17:08
Mathematics, 06.05.2020 17:08
English, 06.05.2020 17:08
Mathematics, 06.05.2020 17:08
Mathematics, 06.05.2020 17:08
Mathematics, 06.05.2020 17:08
Physics, 06.05.2020 17:08
English, 06.05.2020 17:08
