Engineering, 11.07.2019 02:40 hei40563273
A100mm long steel bush with 39.98mm internal diameter and 60mm outer diameter is force fitted onto a steel tube. the150mm long steel tube has 40.02mm outer diameter and 25mm internal diameter. the steel tube is subject to an internal pressure of 20mpa. what is the resulting interference pressure between the bush and the tube, assuming that their nominal diameters are 40mm? the young's modulus for steel should be taken as 200gpa and the poisson's ratio as 0.28
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
You know the right answer?
A100mm long steel bush with 39.98mm internal diameter and 60mm outer diameter is force fitted onto a...
Questions
Business, 30.10.2021 09:50
Biology, 30.10.2021 09:50
Mathematics, 30.10.2021 09:50
English, 30.10.2021 09:50
Mathematics, 30.10.2021 09:50
History, 30.10.2021 09:50
Social Studies, 30.10.2021 14:00
Mathematics, 30.10.2021 14:00
Mathematics, 30.10.2021 14:00
English, 30.10.2021 14:00
