subject
Engineering, 11.07.2019 02:20 kutie543

Acar engine has a power output of 65 hp. if the fuel consumption rate of the car is 45 lbm/hr and the fuel has a heating value of 19,000 btu/lbm (that is 19,000 btu of energy is released for each lbm of fuel burned), determine the thermal efficiency of the engine. [note: 1hp=2544 btu/hr]

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:20
Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k
Answers: 3
question
Engineering, 04.07.2019 19:10
Asteel wire of 2 mm diameter is fixed between two points located 2 m apart. the tensile force in the wire is 250n, if its density of steel is given by 7830 kg/m3 the fundamental frequency of vibration hz? ?
Answers: 3
question
Engineering, 05.07.2019 10:10
What is the correct way to measure the overall length of a boat? measure from the tip of the bow to the highest point on the gunwale. measure from the tip of the bow in a straight line to the stern of the boat. measure from the tip of the bow in a straight line to the back seat. measure from port to starboard at the boat's widest point.
Answers: 1
question
Engineering, 06.07.2019 03:10
Asolid steel sphere (k=63.9 w m-1 k-1 , ? =7832 kg m-3 , c=0.523 kj kg-1 k-1 ), 100 mm in diameter is initially at a uniform temperature of 500o c and is suddenly quenched in a large oil bath for which t? = 100o c and h = 3200 w m-2 k-1. estimate the time required for the sphere to cool to 200o c and to 110o c
Answers: 1
You know the right answer?
Acar engine has a power output of 65 hp. if the fuel consumption rate of the car is 45 lbm/hr and th...
Questions
question
Mathematics, 24.08.2021 21:40
question
Engineering, 24.08.2021 21:40