Engineering, 03.02.2020 13:55 taryn1932

Along cylinder of 30-mm diameter, initially at a uniform temperature of 750 k, is suddenly quenched in a large, constant-temperature oil bath at 350 k. the cylinder properties are k= 1.7 w/m·k, c= 1600 j/kg·k, and ρ= 400 kg/m3, while the convection coefficient is 51 w/m2·k. (1) use the one-term approximation method to solve for the fourier number.? (2) solve for the time required for the surface of the cylinder to reach 500 k, in sec.?

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent

Answers: 2

Answer

You know the right answer?

Along cylinder of 30-mm diameter, initially at a uniform temperature of 750 k, is suddenly quenched...

Questions