Apiston-cylinder with a volume of 0.20 m3 holds 1 kg of h20 at a pressure of 150 kpa. transfer of heat to the cylinder causes an isothermal expansion of the piston until the volume quadruples. a. find the heat transferred during this process (kj) b. find the work done during this process (kj).

Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?

For a gate width of 2 m into the paper, determine the force required to hold the gate abc at its location.

Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.05 ka/s and leaves at 0.8 mpa and 50°c. the refrigerant is cooied in the condenser to 0.72 mpa and 26'c. it is then throttled to 0.15 mpa. sketch the t-s diagram for the system and evaluate: 6) the rate of heat removai from the refrigerated space (kw), it) the power input to the compressor (kw), ii) the isentropic efficiency of the compressor (%), and iv) the cop of the refrigerator.