subject
Engineering, 11.07.2019 01:20 azimgd1612

The island of maui is changing out an old power plant. they are short on capital so they propose using a brayton cycle with a pressure ratio of 9: 1 to produce power then when money becomes available to add a steam rankine cycle in a combined cycle fashion to increase the efficiency. if the cold air standard assumptions apply calculate the expected efficiency from the brayton cycle. if the steam rankine bottoming cycle is modeled as a simple ideal cycle with a condenser pressure of 0.06 bar and a boiler exit at 30 bar 500 c calculate the expected total efficiency after adding the rankine cycle

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.
Answers: 2
question
Engineering, 04.07.2019 18:10
Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k
Answers: 2
question
Engineering, 04.07.2019 19:20
At steady state, air at 200 kpa, 325 k, and mass flow rate of 0.5 kg/s enters an insulated duct having differing inlet and exit cross-sectional areas. the inlet cross-sectional area is 6 cm2. at the duct exit, the pressure of the air is 100 kpa and the velocity is 250 m/s. neglecting potential energy effects and modeling air as an 1.008 kj/kg k, determine ideal gas with constant cp = (a) the velocity of the air at the inlet, in m/s. (b) the temperature of the air at the exit, in k. (c) the exit cross-sectional area, in cm2
Answers: 2
question
Engineering, 04.07.2019 19:20
Consider airflow over a flat plate of length l = 1.5 m under conditions for which transition occurs at le = 0.9 m based on the critical reynolds number, re,e = 5 x 10. evaluating the thermophysical properties of air at 400 k, determine the air velocity. (hint: use the tables to find the properties of air)
Answers: 3
You know the right answer?
The island of maui is changing out an old power plant. they are short on capital so they propose usi...
Questions
question
Mathematics, 21.11.2020 04:40
question
History, 21.11.2020 04:40
question
Mathematics, 21.11.2020 04:40
question
Social Studies, 21.11.2020 04:40
question
Mathematics, 21.11.2020 04:40
question
Mathematics, 21.11.2020 04:40
question
Mathematics, 21.11.2020 04:40
question
Advanced Placement (AP), 21.11.2020 04:40