subject
Engineering, 11.07.2019 01:10 mbol7123

Consider a spent nuelear fuel rod of constant thermal conductivity k, perimeter p, length l, and uniform cross-sectional area ac. energy is released at a uniform rate q in w/within the rod. the left end of the rod is insulated and the right side is held at to. the outer surface of the rod is immersed in water at a temperature t and known convection coefficient h. the temperature gradients are small in all directions other than the x-direction and steady-state conditions apply. a) draw a differential control volume and show all energy transfers. b) applying the 15t law of thermodynamics, derive the governing differential equation for the temperature distribution t(a) in the rod in terms of x. q. ac, k, h, p and t- and state the boundary conditions at x = 0 and x = l.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
question
Engineering, 04.07.2019 18:10
Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.
Answers: 1
question
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
question
Engineering, 04.07.2019 18:10
Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables
Answers: 1
You know the right answer?
Consider a spent nuelear fuel rod of constant thermal conductivity k, perimeter p, length l, and uni...
Questions
question
Mathematics, 10.12.2019 05:31