Engineering, 30.01.2020 06:52 jibjabsalar1212

Astraight rectangular fin is attached to a wall at a temperature of 100 c to dissipate excess heat that is produced. the fin material is an integral part of the cast-iron wall (k-50 w/m-k). the surface of the fin is exposed to an ambient air temperature of 20°c and the convection coefficient is estimated to be 60 w/m-.k. the fin thickness is 2 mm and space limitations require that the width of fin be no larger than 20 cm. assuming constant material properties, one-dimensional heat transfer along the length, and an adiabatic fin tip: a) find the smallest value of the fin length l for which the temperature of the fin tip at x l does not exceed 52 °c. b) find the heat transfer rate.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Ifa component is made of two or more materials with different modulus of elasticity (e), it is called a composite member and we calculate the factor·n". mention the formula for calculating n". also, ifn> 1, explain what will happen to the 1. transformed.gi) ifn 1, what will happen to the material when transformed material when

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer

Answers: 2

Answer

You know the right answer?

Astraight rectangular fin is attached to a wall at a temperature of 100 c to dissipate excess heat t...

Questions