File compression is only available on hard-disk drives. a. true b. false

You are working as a security analyst in a company xyz that owns the whole subnet range of 23.0.0.0/8 and 192.168.0.0/8. while monitoring the data, you find a high number of outbound connections. you see that ip's owned by xyz (internal) and private ip's are communicating to a single public ip. therefore, the internal ip's are sending data to the public ip. after further analysis, you find out that this public ip is a blacklisted ip, and the internal communicating devices are compromised. what kind of attack does the above scenario depict?

Print "usernum1 is negative." if usernum1 is less than 0. end with newline. convert usernum2 to 0 if usernum2 is greater than 10. otherwise, print "usernum2 is less than or equal to 10.". end with newline

Usually, when we sniff packets, we are only interested certain types of packets. we can do that by setting filters in sniffing. scapy’s filter use the bpf (berkeley packet filter) syntax; you can find the bpf manual from the internet. set the following filters and demonstrate your sniffer program again (each filter should be set separately): (a) capture only the icmp packet. (b) capture any tcp packet that comes from a particular ip and with a destination port number 23. (c) capture packets comes from or to go to a particular subnet. you can pick any subnet, such as 128.230.0.0/16; you should not pick the subnet that your vm is attached to.