Write a Console Dialog Application in the main() function. You will need to display a menu. The Input processing should onlybe done using functions: getPackage, validPackage, getHours, validHours, and program control constructs. The Calculation Processing should only be done using functions:calculatePkg_A, calculatePkg_B, calculatePkg_C, and programcontrol constructs. For Output Results you should display the Package Selected, Hours of Usage, and the Amount charged for the month.

Write a program in plp assembly that counts up by one starting from zero (or one) inside a loop and writes this value to the leds every time the value is increased. the memory address of the leds is 0xf0200000. the table below shows the meaning and an example usage of the instructions covered in the video, plp instructions for project 1. instruction example usage meaning load immediate li $t0, 8 register $t0 is set to the value, 8. store word sw $t2, 0($t1) the value in register $t1 is used as the memory address. the value in register $t2 is copied into this memory address. add addiu $t4, $t3, 29 register $t4 is assigned the sum of 29 and the value in register $t3. jump j your_label_name the program jumps to the line following the label, "your_label_name: ". label your label name: defines a label called "your_label_name: " that can be jumped to