Computers and Technology, 22.04.2021 17:30 JasmineFS5181

Which of the following best explains how messages are typically transmitted over the Internet? The message is broken into packets that are transmitted in a specified order. Each packet must be received in the order it was sent for the message to be correctly reassembled by the recipient’s device. The message is broken into packets that are transmitted in a specified order. Each packet must be received in the order it was sent for the message to be correctly reassembled by the recipient’s device. A The message is broken into packets. The packets can be received in any order and still be reassembled by the recipient’s device. The message is broken into packets. The packets can be received in any order and still be reassembled by the recipient’s device. B The message is broken into two packets. One packet contains the data to be transmitted and the other packet contains metadata for routing the data to the recipient’s device. The message is broken into two packets. One packet contains the data to be transmitted and the other packet contains metadata for routing the data to the recipient’s device. C The message is transmitted as a single file and received in whole by the recipient’s device.

Answers: 1

Show answers

Another question on Computers and Technology

Computers and Technology, 23.06.2019 02:00

For a typical middle-income family, what is the estimated cost of raising a child to the age of 18? $145,500 $245,340 $304,340 $455,500

Answers: 1

Answer

Computers and Technology, 23.06.2019 09:30

:you areto design the controller for alight that functions both as an ordinary light and also as a motion activated light and alarm. a.if the manual switch s is on, then the light l is on. b.besides the manual switch, there is a motion detector, m1, which activatesthis light.c.if motion is detected but the light is on anyway because s is on, only then a secondoutput a, an alarm, is turned on. d.the disable switch, d, disables the motion activated light and alarmbut leaves manual control operation of the light using switch s.(i)read the problem statement and clearly identify the inputs and outputs for the circuit you are designing. (ii)create the truth table for this system; include the light, alarm, switch, disable, and the motion sensor.(iii)draw a schematic of this system.

Answers: 1

Answer

Computers and Technology, 23.06.2019 16:00

Write a grading program for a class with the following grading policies: a. there are two quizzes, each graded on the basis of 10 points. b. there is one midterm exam and one final exam, each graded on the basis of 100 points. c. the final exam counts for 50% of the grade, the midterm counts for 25%, and the two quizzes together count for a total of 25%. (do not forget to normalize the quiz scores. they should be converted to a percentage before they are averaged in.) any grade of 90 or more is an a, any grade of 80 or more (but less than 90) is a b, any grade of 70 or more (but less than 80) is a c, any grade of 60 or more (but less than 70) is a d, and any grade below 60 is an f. the program will read in the studentâ€™s scores and output the studentâ€™s record, which consists of two quiz and two exam scores as well as the studentâ€™s average numeric score for the entire course and final letter grade. define and use a structure for the student reco

Answers: 2

Answer

Computers and Technology, 24.06.2019 10:00

3. what do the terms multipotentialite, polymath, or scanner mean?

Answers: 2

Answer

You know the right answer?

Which of the following best explains how messages are typically transmitted over the Internet? The m...

Questions