3. (30 points) Implement the following program in which you will swap consecutive elements of the array Your array should be stored as a data structure where the first word is the number of elements in the array, followed by the elements of the array. Each element is an integer. Array values 150, 33, 472, 151, 109, 102 Swap each element in the array with next element of the array. In total N-1 swapping will take place. N is number of elements in the array.

Write a program in plp assembly that counts up by one starting from zero (or one) inside a loop and writes this value to the leds every time the value is increased. the memory address of the leds is 0xf0200000. the table below shows the meaning and an example usage of the instructions covered in the video, plp instructions for project 1. instruction example usage meaning load immediate li $t0, 8 register $t0 is set to the value, 8. store word sw $t2, 0($t1) the value in register $t1 is used as the memory address. the value in register $t2 is copied into this memory address. add addiu $t4, $t3, 29 register $t4 is assigned the sum of 29 and the value in register $t3. jump j your_label_name the program jumps to the line following the label, "your_label_name: ". label your label name: defines a label called "your_label_name: " that can be jumped to