You want to copy data from one cell or range to an adjacent cell or range in your spreadsheet, without using a shortcut key. Which of the following can you drag on your spreadsheet to do this?

In which phase does software coding and testing happen in the spiral model? the spiral model does not have a separate testing phase. both, software coding and testing occurs during the phase.

You need to design a circuit that implements the functions in the following table: s0 s1 function0 0 a + 10 1 a – b1 0 a + b1 1 a – 1s0 and s1 are 1-bit control inputs to select the function of the circuit. inputs a and b are 4-bitnumbers in 2s complement form. the output is also a 4-bit number in 2s complement form.you are allowed to use only one ttl 7483 4-bit adder to implement all the functions. but anynumber of other components (except the adder) can be used.hint: design a combinational logic circuit to modify the input b and the “carry input” of theadder depending on the control inputs s0 and s1.important: lab grade will depend on the working of the circuit & will be checked of by your labinstructor.1. is the output valid for the following input combinations: a. s0 = 0, s1 = 0, a = 7, b = 3? b. s0 = 0, s1 = 1, a = 7, b = 3? c. s0 = 1, s1 = 0, a = -4, b = -5? d. s0 = 1, s1 = 1, a = -8, b = 6? 2. what is the range of inputs (for both a and b) that will produce the valid output for all the functions?

3.11.3 quiz: comparing and analyzing function typesquestion 4 of 102 pointswhat can you say about the y-values of the two functions f(x) = 3x2-3 andg(x)=2* - 3?