8. Foot File smoothen the callous of the toe nails. true or false

The “rule of 72” is used to approximate the time required for prices to double due to inflation. if the inflation rate is r%, then the rule of 72 estimates that prices will double in 72/r years. for instance, at an inflation rate of 6%, prices double in about 72/6 or 12 years. write a program to test the accuracy of this rule. for each interest rate from 1% to 20%, the program should display the rounded value of 72/r and the actual number of years required for prices to double at an r% inflation rate. (assume prices increase at the end of each year.)

What side length would you specify if you were required to create a regular hexagonal plate that was composed of 33 cm(squared) of sheet metal? dimension the side length to 0.1 cm

You need to design a circuit that implements the functions in the following table: s0 s1 function0 0 a + 10 1 a – b1 0 a + b1 1 a – 1s0 and s1 are 1-bit control inputs to select the function of the circuit. inputs a and b are 4-bitnumbers in 2s complement form. the output is also a 4-bit number in 2s complement form.you are allowed to use only one ttl 7483 4-bit adder to implement all the functions. but anynumber of other components (except the adder) can be used.hint: design a combinational logic circuit to modify the input b and the “carry input” of theadder depending on the control inputs s0 and s1.important: lab grade will depend on the working of the circuit & will be checked of by your labinstructor.1. is the output valid for the following input combinations: a. s0 = 0, s1 = 0, a = 7, b = 3? b. s0 = 0, s1 = 1, a = 7, b = 3? c. s0 = 1, s1 = 0, a = -4, b = -5? d. s0 = 1, s1 = 1, a = -8, b = 6? 2. what is the range of inputs (for both a and b) that will produce the valid output for all the functions?