On RouterB, configure Fa 0/1 to forward all DHCP packets to 172.16.1.1. On RouterB, restrict the following UDP broadcast protocols from being forwarded to RouterA: Port 137: NetBIOS Name Service Port 138: NetBIOS Datagram Service When you are finished, save the configuration changes on RouterB.

It is vital to research each of the services you plan to disable before implementing any change, especially on critical machines such as the: a. servers in the test environment. b. domain controller and other infrastructure servers. c. desktops that have previously been attacked. d. desktops used by upper-level management.

When building customer relationships through email what should you not do? question 2 options: utilize proper grammar, spelling, and punctuation type in all capital letters use hyperlinks rather than attachments respond to all emails within 24 hours

Write a program in plp assembly that counts up by one starting from zero (or one) inside a loop and writes this value to the leds every time the value is increased. the memory address of the leds is 0xf0200000. the table below shows the meaning and an example usage of the instructions covered in the video, plp instructions for project 1. instruction example usage meaning load immediate li $t0, 8 register $t0 is set to the value, 8. store word sw $t2, 0($t1) the value in register $t1 is used as the memory address. the value in register $t2 is copied into this memory address. add addiu $t4, $t3, 29 register $t4 is assigned the sum of 29 and the value in register $t3. jump j your_label_name the program jumps to the line following the label, "your_label_name: ". label your label name: defines a label called "your_label_name: " that can be jumped to