Write a method called printLevel that accepts an integer parameter n and prints the values at level n from left to right, one per line. We will use the convention that the overall root is at level 1, its children are at level 2, and so on. If there are no values at the level, your method should produce no output. Your method should throw an IllegalArgumentException if it is passed a value for a level that is less than 1. For example, if a variable t refers to reference tree #2, then the call of t. printLevel(3); would produce the following output: 0
7
6
Add the above method to the IntTree class from this chapter. You may define additional private methods to implement your public method if necessary. Several problem descriptions refer to the following reference binary trees:

A.) generate scaffolding to create database for your application. develop all the entities identified in assignment #2. add any additional that may be identified later. b.) add data validation rules to the models that are appropriate for your application and data. c.) create links for each scaffold in the header section. part 2: application updates [30 points] a.) add two additional views to the "home" controller you created in assignment #1. b.) the two views should be named as “privacy" and "". c.) link the two newly created views in the footer section. hint: you would need to modify the “home" controller definition and create “privacy.html.erb" and “.html.erb" files in appropriate locations.

Asequential circuit contains a register of four flip-flops. initially a binary number n (0000 ≤ n ≤ 1100) is stored in the flip-flops. after a single clock pulse is applied to the circuit, the register should contain n + 0011. in other words, the function of the sequential circuit is to add 3 to the contents of a 4-bit register. design and implement this circuit using j-k flip-flops.

You need to design a circuit that implements the functions in the following table: s0 s1 function0 0 a + 10 1 a – b1 0 a + b1 1 a – 1s0 and s1 are 1-bit control inputs to select the function of the circuit. inputs a and b are 4-bitnumbers in 2s complement form. the output is also a 4-bit number in 2s complement form.you are allowed to use only one ttl 7483 4-bit adder to implement all the functions. but anynumber of other components (except the adder) can be used.hint: design a combinational logic circuit to modify the input b and the “carry input” of theadder depending on the control inputs s0 and s1.important: lab grade will depend on the working of the circuit & will be checked of by your labinstructor.1. is the output valid for the following input combinations: a. s0 = 0, s1 = 0, a = 7, b = 3? b. s0 = 0, s1 = 1, a = 7, b = 3? c. s0 = 1, s1 = 0, a = -4, b = -5? d. s0 = 1, s1 = 1, a = -8, b = 6? 2. what is the range of inputs (for both a and b) that will produce the valid output for all the functions?