A magnetic disk drive requires a motor to position a read/write head over tracks of data on a spinning disk, (see fig. e4.4 in dorf and bishop). the motor head may be represented by the transfer function

Explanation:

The transfer function of the given problem could be written as;

G(s) = 10 / s(ts + 1)

where t = 0.001 s

Now the transfer function would actually give the position error between the actual and desired point of the read/write head. A better and steady state function would enable to reduce the error. The error would be processed with the input signal and a closed loop control system will be implemented to smoothen the disk read or write system

the printer can be used in a both wired and wireless network, only one of the connection methods can be used at one time when the wireless setting is enabled, the wired (ethernet) setting is disabled.

but first you need to

`connect the cord to your computer

`open settings app from the start menu

`click devices

`than click add printer or scanner

and than you should be able to do it from there, if not let me know i can you! : )