Translate the following C code to RISC-V assembly code. Use a minimum number of instructions. Assume that the values of a, b, i, and j are in registers x5, x6, x7, and x29, respectively. Also, assume that register x10 holds the base address of the array D. for(i=0; i

What is the worst-case complexity of the maxrepeats function? assume that the longest string in the names array is at most 25 characters wide (i.e., string comparison can be treated as o( class namecounter { private: int* counts; int nc; string* names; int nn; public: namecounter (int ncounts, int nnames); int maxrepeats() const; }; int namecounter: : maxrepeats () { int maxcount = 0; for (int i = 0; i < nc; ++i) { int count = 1; for (int j = i+1; j < nc; ++j) { if (names[i] == names[j]) ++count; } maxcount = max(count, maxcount); } return maxcount; }

Given a link with a maximum transmission rate of 32.8 mbps. only two computers, x and y, wish to transmit starting at time t = 0 seconds. computer x sends filex (4 mib) and computer y sends filey (244 kib), both starting at time t = 0. statistical multiplexing is used, with details as follows packet payload size = 1000 bytes packet header size = 24 bytes (overhead) ignore processing and queueing delays assume partial packets (packets consisting of less than 1000 bytes of data) are padded so that they are the same size as full packets. assume continuous alternating-packet transmission. computer x gets the transmission medium first. at what time (t = ? ) would filey finish transmitting? give answer in milliseconds, without units, and round to one decimal places (e.g. for an answer of 0.013777 seconds you would enter "13.8" without the quotes)

What is the primary difference between the header section of a document and the body? a. the body is displayed on the webpage and the header is not. b. the header is displayed on the webpage and the body is not. c. the tag for the body is self-closing, but the tags for the headers must be closed. d. the tag for the header is self closing, but the tag for the body must be closed.