Create an application named cardemo that declares at least two car objects and demonstrates how they can be incremented using an overloaded ++ operator.

create a car class that contains the following properties:

model - the car model (as a string)
mpg the car's miles per gallon (as a double)
include two overloaded constructors. one accepts parameters for the model and miles per gallon; the other accepts a model and sets the miles per gallon to 20.

overload a ++ operator that increases the miles per gallon value by 1. the cardemo application creates at least one car using each constructor and displays the car values both before and after incrementation.

Consider the following statements, then select one of the answers below: the signal() function shown below registers "sig_handler()" as the signal handler function for the sigkill signal, without the complexity of using when the sigkill signal is sent to a process running this code, by a user typing "kill -kill ", where the correct process id is used for to target the process, sig_handler() will be executed.

Now, open this passage to read about fafsa requirements. describe the information you will need to provide in order to complete a fafsa. list at least three of the required documents you must include.

Write a program in plp assembly that counts up by one starting from zero (or one) inside a loop and writes this value to the leds every time the value is increased. the memory address of the leds is 0xf0200000. the table below shows the meaning and an example usage of the instructions covered in the video, plp instructions for project 1. instruction example usage meaning load immediate li $t0, 8 register $t0 is set to the value, 8. store word sw $t2, 0($t1) the value in register $t1 is used as the memory address. the value in register $t2 is copied into this memory address. add addiu $t4, $t3, 29 register $t4 is assigned the sum of 29 and the value in register $t3. jump j your_label_name the program jumps to the line following the label, "your_label_name: ". label your label name: defines a label called "your_label_name: " that can be jumped to